User's Manual

CHAPTER 5
EXAMPLE CONFIGURATIONS
Revised: 23 Jan 08 5-6 EST P/N AA107G
6. Enter the default route (Gateway) address for the network. This AP Router 195Eg will use the Network Router for address
resolution (Figure 3). Enter the IP address for the Network Router and any DNS server information. If you are not connecting
the Model 195Eg to the Internet, leave blank and press the Next button. Figure 9.
7. Select Yes if you will be using security for client access to your wireless network (recommened).
NOTE: The setting of this security level is ONLY for client access to the Model 195Eg. The security of the Bridge
communication between the Model 195Eg’s is separate and will be configured during the repeater configuration.
Enter the SSID for your 802.11g network. The SSID is the unique identification for your wireless network and all 802.11g
devices that share a wireless network MUST have the same SSID code. This identification code is case sensitive and must
NOT contain spaces. Reference Figure 10.
Figure 9: Wireless Security Level Settings
Figure 10: WEP Key Entry