User's Manual

CHAPTER 5
EXAMPLE CONFIGURATIONS
Revised: 23 Jan 08 5-7 EST P/N AA107G
8. Select the encryption level for the wireless client access to the network. For further information on the different levels of
security, please refer to Appendix E – Security of this User’s Manual. If you would like to hide the SSID from broadcasting
from the Access Point and would like to discard the broadcast probes select Yes. If Yes is selected the Model 195Eg will no
longer send out periodic SSID radio beacons that can be identified with 802.11b network scanning software. The users of the
network will have to know the SSID to enter the network and security is increased, but if you want the SSID to be broadcast to
the network for easy identification then select No. In our example, we will be using mobile clients with 128 bit WEP.
Reference Figure 11.
9. Enter the WEP key values for your application that will be used by all devices on the wireless network. Reference Figure 12.
Figure 11: Security Selection
Figure 12: WEP Key Input Screen