User's Manual

CHAPTER 5
EXAMPLE CONFIGURATIONS
Revised: 23 Jan 08 5-8 EST P/N AA107G
10. Enter the values for the Access Control List (ACL). This is a configurable MAC filter that can be set to allow or deny specific
wireless MAC address to the network. This feature is further explained in Appendix E – Security. In our example we will not
use the ACL. Reference Figure 13.
11. Select the frequency channel of operation. All Access Points in the same Repeater Peer network need to be on the same radio
frequency channel. See Appendix D – Radio Configuration for help in selecting the frequency channel. Reference Figure 14.
Figure 13: Access Control List Settings
Figure 14: Radio Channel Selection