User's Manual
Table Of Contents
- Chapter 0 - Front Cover
- Chapter 0 - Table of Contents
- Chapter 1 - Introduction
- Chapter 2 - Starting Out
- Chapter 3 - Example Applications
- Chapter 4 - Utilities and Features
- Chapter 5 - Web Configuration Manager
- Chapter 6 - Serial Configuration and Applications
- Chapter 7 - Bridging and Mesh Networking
- Chapter 8 - Antenna Setup
- Apx A - Licensing Information
- Apx B - Interface Ports
- Apx C - Radio Configuration
- Apx D - Security
- Apx E - Troubleshooting
- Apx F - Horizon 2.4 Specifications
- Apx G - Horizon 900 Specifications
APPENDIX F
HORIZON 2.4 SPECIFICATIONS
Antenna Specifications
Revised: 28 Jun 16 APX F-4 ESTeem Horizon Series
Model No: AA203Eg
Antenna Type: Directional, DC grounded
Applications: Fixed base.
Frequency: 2400 to 2485 MHz
Polarization: Vertical or Horizontal
Impedance: 50 ohms
Gain: 6 dBi (4 dBd)
VSWR: < 1.5
Front to Back Ratio: >23 dB
Horizontal Beamwidth: 55 degrees @ ½ power
Vertical Beamwidth: 55 degrees @ ½ power
Antenna Material: Sealed in UV stable fiberglass enclosed radome
Mounting Hardware: Stainless steel U bolts (included) for mounting up
to 1 5/8 in. diameter pipe.
Antenna Connector: TNC-R Male with 36in. pig tail
Maximum Power Input: 5 Watts
Antenna Envelope: 4.5 in. length by 3 in. diameter
Windload (RWV): 125 mph
Lateral Thrust at
Rated Wind: 5.8 lbs.
Wind Surface Area: 0.060 ft
2
Weight: 1 lbs.
Model AA203Eg
Caution
To comply with the FCC
exposure compliance
requirements, a separation
distance of at least 24 cm
must be maintained between
the antenna and all persons.