User's Manual

APPENDIX F
HORIZON 2.4 SPECIFICATIONS
Antenna Specifications
Revised: 28 Jun 16 APX F-5 ESTeem Horizon Series
Model No: AA204Eg.1
Applications: Fixed base mounting
Antenna Type: 2.4 GHz ISM, Directional, DC Grounded, Parabolic Grid
Frequency: 2400-2485 MHz
Polarization: Vertical or Horizontal
Impedance: 50 ohms
Gain: 15 dBi (13 dBd) nominal
VSWR: < 1.5:1 nominal
Front to Back Ratio: >24 dB
Horizontal Beamwidth: 16 degrees @ ½ power
Vertical Beamwidth: 11 degrees @ ½ power
Antenna Material: Zinc plated cold rolled steel with polyester power
coat finish
Recommended Mounting
Hardware: Standard U-bolt steel mast clamp complete with
mounting hardware. Designed for masts of up to
2.5 in. O.D.
Antenna Connector: TNC-R Male with 36 in. pig-tail
Maximum Power Input: 10 Watts
Wind Survival: 100 mph
Wind Load: 16 mph
Antenna Envelope: 34 in. length by 17 in. width by 11 in. height
Weight: 3 lbs.
Use of the AA204Eg.1, directional antenna is limited to fixed point-to-point applications only. In accordance with FCC
Section 15.247(b)iii, this antenna must be professionally installed. The installer must ensure the system is used
exclusively for fixed, point-to-point applications and the ESTeem Model 195Eg is set for 0.25 Watts output power (Power
Level = Min).
Model AA204Eg.1
Caution
To comply with the FCC exposure
compliance requirements, a
separation distance of at least 50 cm
must be maintained between the
antenna and all persons.