User manual

chapter 9 playing back cues 93
Quickstep
Quickstep allows you to run through a show, checking all cues, without
having to wait for fades. When Quickstep is active, the faders ignore all
upfade, downfade, follow, and wait times. Cues snap immediately to their
completed levels when you press [Go] or [Back].
To enable Quickstep and run a cue check, follow these steps:
Keystrokes: Action:
1. Press [Stage]. Selects Stage display
2. Press [S7], More Soft-
keys, [S1], Enable Quick-
step.
Turns on Quickstep
3. Press [Cue] [1] [Enter]. Selects cue 1
4. Press [Go]. Cue 1 comes up on stage
instantly
5. Continue to press [Go] until
you have checked all cues.
Each cue comes up on stage
instantly
6. Once you are finished,
press [S1], Disable Quick-
step.
Turns off Quickstep; fades will
operate normally