User manual

chapter 10 groups 101
Modifying groups
Express allows you to modify groups in Stage or Blind modes.
In Blind
Follow these steps to add channels to a group in Blind display mode:
Warning: You must press [Enter] after you enter the group number. If you
do not, Express displays the channels used in the group, but does not
enter Group Editing mode.
Note: This process can also be used to create a new group in Blind display
mode. If the group number you enter to modify doesn’t exist, it is created
as a new group.
Keystrokes: Action:
1. Press [Blind] . Selects Blind display mode
2. Press [Group]. Prompt reads:
Group mode – To recall a
group, select the number and
set it to a level
3. Press [1]. Selects group 1’s channels
Corner reads: Group 1
4. Press [Enter] . Brings up group 1 in group edit-
ing mode. Channel levels should
be white
Prompt reads:
Select channel numbers
5. Press [2][5] [Thru] [3][0] [At]
[5][0].
Modifies look, adding channels
25 through 30 at 50 percent
6. Press [Record]. Prompt reads:
To record group, select
number and press ENTER
To cancel, press CLEAR
7. Press [Enter]. Records group 1 with new levels