User manual

chapter 15 diskette functions 169
Reading a show from diskette
When you read a show and system settings from a diskette and load it
into memory, the new show completely overwrites the current show,
including channel and dimmer counts and default times and level . There-
fore, if you want to keep the current show, follow the instructions on page
168 to record current show before you read a new show from diskette.
Fades being executed are interrupted during the read operation; fades
resume when read is complete . To read all information from diskette into
memory follow these steps:
Keystrokes: Action:
1. Insert diskette in disk
drive.
2. Press [Setup] . Selects Setup display
3. Press [3], Disk Functions,
[Enter].
Selects Diskette Functions menu
4. Press [2], Read Show
from Disk, [Enter].
The following screen appears. Show
information is displayed, including
show name, date recorded, etc
5. Press [Enter] , or press
[Clear] to cancel the opera-
tion.
Message appears on screen:
From disk in progress. Message
remains until show is loaded