Worcester Polytechnic Institute Lighting System Submittals Barbizon Light of New England Timothy Johnsen, Project Manager 3 Draper Street Woburn MA 01801 800-935-3920 Phone extension 233 781-935-9273 FAX tjohnsen@barbizon.
Worcester Polytechnic Institute ~ Dimming and Distrubution Package SUBMITTAL DATA SHEETS - TABLE OF CONTENTS Page Qty Description Section I - Dimming System 1 Dimmer enclosure for 48 modules - Designed for 3 phase, 4 wire and ground operation at a 3-6 maximum of 800A, 120/208V 36 Dual 20A Dimmer Module (72 "stage" dimmers) 7-8 2 Dual 20A Dimmer Module (4 "house" dimmers) 7-8 10 Air Flow Module N/A 1 Control Electronics Module (CEM+) 9 - 12 Section II - Control System 1 ETC Express 125 Channel Control con
ETC Sensor + Racks ® Sensor+ Standard Series O R D E R I N G I N F O R M AT I O N Installation Racks Model# Sensor+ dimming systems provide high density, professional features and exceptional reliability for lighting applications that require the best the entertainment industry can offer.
O R D E R I N G I N F O R M AT I O N S P E C I F I C AT I O N S GENERAL Racks available in four sizes SR6+ SR12+ SR24+ SR48+ Dimmer Modules 6 modules, 12 dimmers maximum 12 modules, 24 dimmers maximum 24 modules, 48 dimmers maximum 48 modules, 96 dimmers maximum Model# D15 D20 D15E D20E D50AF Dual density (two dimmers per module), single density and half density dimmer modules available Operating temperature: 0-40°C / 32-104°F Dimmer room HVAC systems must at all times maintain the specified ambient t
Sensor+ Racks ® Sensor+ Standard Series TYPICAL DMX SYSTEM RISER DIAGRAM DMX Plug-in DMX Plug-in DMX Booth DMX Stage Express Console Sensor+ Dimming System TYPICAL NETWORK SYSTEM RISER DIAGRAM ETCNet2 PC for Sensor+ Connect and additional ETC Software Switch ETCNet2 ETCNet2 ETCNet2 Emph Facepanel CRT#1 Emphasis Server ETCNet2 ON RFU Emph Facepanel CRT#2 KEYBOARD OFF Video Node Remote Focus Unit DMX ETCNet2 Expression ECS Facepanel DMX Node Barbizon Light WPI Submittal Package To mo
Sensor+ Racks ® Sensor+ Standard Series PHYSICAL Clearance above fan Empty Dimmer Rack Weights Model Weight SR6+ SR12+ SR12+ Door* SR24+ SR24+ Door* SR48+ SR48+ Door* *Rack doors ship separately lbs 36.0 45.0 11.0 107.0 17.0 188.0 31.0 Shipping Weight kgs 16.0 21.0 5.0 49.0 8.0 86.0 14.0 lbs 45.0 50.0 14.0 115.0 20.0 198.0 35.0 kgs 21.0 23.0 6.5 53.0 9.0 90.0 16.0 10.0" 25cm SR48+ Installed Dimmer Rack Weights* Model Maximum Weight lbs kgs SR6+ 71.0 33.0 SR12+ 115.0 53.0 SR24+ 261.0 119.
15-20 Amp Dimmer Modules ELECTRONIC THEATRE CONTROLS Standard Dimmer Series G E N E R A L I N F O R M AT I O N O R D E R I N G I N F O R M AT I O N D15 and D20 modules provide cost-effective digital phase angle dimming for standard incandescent fixtures. APPLICATIONS FEATURES Standard Sensor Dimmer Modules All Sensor® Installation Racks (except Delta) All Sensor Touring Racks All Sensor Portable Packs Two 1.8 or 2.
15-20 Amp Dimmer Modules Standard Dimmer Series S P E C I F I C AT I O N S PHYSICAL DIMMER MODULES Dimmers are UL and cUL listed for continuous Module Weights duty at 100% of rated load D15 – 1.8kW D20 – 2.
ETC CEM+ Control Module Sensor®+ Series G E N E R A L I N F O R M AT I O N O R D E R I N G I N F O R M AT I O N The Sensor+ Control Electronics Module (CEM+) receives and manages Ethernet control signals as well as two DMX512 inputs. It controls dimmer output, and communicates feedback information to compatible lighting control devices and network peripherals.
S P E C I F I C AT I O N S GENERAL PHYSICAL ELECTRICAL CONTROL FEATURES FEEDBACK LOCAL PROGRAMMING MENU Universal Control Electronics Module Direct Ethernet connectivity for dimmer levels, feedback and system control UL, cUL LISTED and CE Marked Formed steel body finished with textured epoxy paint Injection molded face panel Slide-in module installs and removes without tools Spring-loaded module release Airflow sensor to ensure adequate airflow Accepts: Single phase Three phase WYE or Delta Universal
CEM+ Control Module Sensor®+ Series DIMENSIONS TOP VIEW 7.00" 178mm FRONT VIEW 11.80" 300mm SIDE VIEW 2.06" 52mm Control Electronic Module Weight Model Maximum BTU Production per module Weight lbs 4.2 CEM+ Shipping Weight kgs 2 lbs 6.2 kgs 2.
CEM+ Control Module Sensor®+ Series SENSOR+ CONNECT DIMMER Set dimmer name and module type CONFIGURATION Set dimmer mode: Normal, Dimmer Doubled Sensor+ Connect duplicates the functions of the Control Electronics Module (CEM+), but on your Emphasis server, computer or even your PDA. This graphical user interface (GUI) allows you to monitor rack activity, reconfigure dimmer curves, record or activate presets – plus a whole lot more.
Express™ 125 & 250 ELECTRONIC THEATRE CONTROLS PUSH PUSH Express Console Series Submasters 1 2 3 4 5 6 7 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 8 9 10 11 12 Master 10 9 8 7 6 5 4 3 2 1 0 13 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 14 15 16 17 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 18 19 20 21 10 9 8 7 6 5 4 3 2 1 0 22 23 24 10 9 8 7 6 5 4 3 2 1 0 A B C
S P E C I F I C AT I O N S 125 or 250 channels 1,024 DMX512 dimmers 600 cues 500 groups 99 focus points Effects with up to 100 steps each 2,000 macros 24 submasters x 10 pages 2 timed/manual fader pairs Diskette drive Single VGA output Printer port UL, cUL, CE listed DISPLAY FUNCTIONS (Requires VGA monitor) Cue List Stage Blind Fader status Spreadsheets and Lists Cue, Sub, Group and Focus point views Patch Proportional levels 32 user–definable profiles Dimmer Doubling capability (see Dimmer Doubling data sh
Express™ 125 & 250 Express Console Series CONSOLE CONNECTIONS Sensor Dimming Rack B DMX B DMX to Scrollers or Moving Lights C ETCLink Cue 1 2 1 M1 A/B Clear Stage Chan 5 at 75 Blind 7 8 D Remote Focus Unit Stage 9 6 Chan Thru Dim M* S* 4 5 Sub Group 1 2 3 And A/B Hold Time Cue – 0 + Except Level A/B Go Track Rec Clear • Enter Rec Solo A/B Back At Full Remote Focus Unit Lamps 12V Ext. 12V RFU F 1.
Express™ 125 & 250 Express Console Series 35" 89cm Lamps 12V Ext. 12V RFU F 1.5A 5 x 20mm 6" 15cm PUSH DMX512 1 - 512 PUSH ETCLink 513 - 1024 PUSH PUSH Electronic Theatre Controls, Inc. 3030 Laura Lane, Middleton, Wisconsin 53562-1754 Product: Model #: Serial #: Manufactured By Power Input CRT Display Parallel Printer Remote Macro 5V @ 3A / 12V @ 2A MIDI ETCNet Out Thru Twisted Pair ThinNet PUSH In PUSH Electronic Theatre Controls, Inc.
9729 Paired - Low Capacitance Computer Cable for EIA RS-422 Applications For more information please call 1-800-Belden1 See Put-ups and Colors Color Code Chart : No. 3 for Paired Cables (Belden Standard).pdf Description: 24 AWG stranded (7x32) tinned copper conductors, twisted pairs, Datalene® insulation, individually shielded with 100% Beldfoil® shield, 24 AWG stranded tinned copper drain wire each pair, PVC jacket.
9729 Paired - Low Capacitance Computer Cable for EIA RS-422 Applications Inner Shield Drain Wire Conductor Material TC - Tinned Copper OUTER JACKET: Outer Jacket Material PVC - Polyvinyl Chloride OVERALL NOMINAL DIAMETER: Overall Nominal Diameter .266 in. MECHANICAL CHARACTERISTICS: Operating Temperature Range -20°C To +80°C UL Temperature Rating 60°C (UL AWM Style 2493) Bulk Cable Weight 34.5 lbs/1000 ft. Max. Recommended Pulling Tension 22 lbs. Min. Bend Radius (Install) 3.25 in.
9729 Paired - Low Capacitance Computer Cable for EIA RS-422 Applications Description Frequency (MHz) Start Frequency (MHz) Stop Frequency (MHz) .384 .7056 .768 1.024 1.4112 1.536 2.048 2.8224 3.072 4.096 5.6448 6.144 8.192 11.2896 12.288 24.576 Max. Operating Voltage - UL 300 V RMS (UL AWM Style 2493) Max. Recommended Current 1 Amp per conductor @ 25°C Nom. Attenuation (dB/100 ft.) 0.74 0.87 0.88 0.94 1.01 1.03 1.13 1.29 1.35 1.57 1.78 1.84 2.13 2.45 2.57 3.
9729 Paired - Low Capacitance Computer Cable for EIA RS-422 Applications © 2005 Belden Wire & Cable Company All Rights Reserved. Although Belden Electronics Division ("Belden") makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability.
6200FE Non-Paired - New Generation® For more information please call 1-800-Belden1 See Put-ups and Colors Description: Bare copper conductors, Flamarrest® insulation, conductors cabled, overall Beldfoil® tape shield (aluminum side out) and drain wire, Flamarrest® jacket with ripcord. Sequential footage marking every two feet.
6200FE Non-Paired - New Generation® Outer Shield Drain Wire Conductor Material TC - Tinned Copper OUTER JACKET: Outer Jacket Material Trade Name Flamarrest® Outer Jacket Material LS PVC - Low Smoke Polyvinyl Chloride Outer Jacket Nominal Wall Thickness .015 in. Outer Jacket Ripcord Yes OVERALL NOMINAL DIAMETER: Overall Nominal Diameter .184 in. MECHANICAL CHARACTERISTICS: Operating Temperature Range 0°C To +75°C UL Temperature Rating 75°C Bulk Cable Weight 31 lbs/1000 ft. Max.
6200FE Non-Paired - New Generation® Item 6200FE 8771000 6200FE 877500 Description 2 #16 FLRST FS FLRST 2 #16 FLRST FS FLRST Put-Up (ft.) 1000 Ship Weight (lbs.) 33 Jacket Color NATURAL 500 16.5 NATURAL Notes C C = CRATE REEL PUT-UP. Revision Number: 1 Revision Date: 02-04-2005 © 2005 Belden Wire & Cable Company All Rights Reserved.
1583A Paired - DataTwist® Category 5e For more information please call 1-800-Belden1 See Put-ups and Colors Color Code Chart : No. 8 for DataTwist Cables (Modified Western Electric).
1583A Paired - DataTwist® Category 5e Overall Nominal Diameter .195 in. MECHANICAL CHARACTERISTICS: Operating Temperature Range -20°C To +75°C Bulk Cable Weight 29 lbs/1000 ft. Max. Recommended Pulling Tension 35 lbs. Min. Bend Radius (Install) 0.5 in. APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE: APPLICABLE STANDARDS: NEC/(UL) Specification CM, UL444 CEC/C(UL) Specification CM IEC Specification 11801 Category 5 TIA/EIA Specification 568-B.2 Category 5e Other Specification NEMA WC-63.
1583A Paired - DataTwist® Category 5e Frequency (MHz) Max. Attenuation (dB/100 m) Min. NEXT (dB) Min. PSNEXT Min. ACR (dB) Min. PSACR (dB) (dB) Min. Return Loss (dB) 1 4 8 10 16 20 25 31.25 62.5 100 155 200 2.0 4.1 5.8 6.5 8.2 9.3 10.4 11.7 17.0 22.0 28.1 32.0 65.3 56.3 51.8 50.3 47.3 45.8 44.3 42.9 38.4 35.3 32.5 30.8 62.3 53.3 48.8 47.3 44.3 42.8 41.3 39.9 35.4 32.3 29.5 27.8 20.0 23.0 24.5 25.0 25.0 25.0 24.3 23.6 21.5 20.1 15.8 15.0 63.0 51.0 46.0 43.0 39.0 36.5 33.9 31.0 22.0 14.0 4.4 4.
1583A Paired - DataTwist® Category 5e 1583A 005U1000 4 PR #24 PP FR PVC U1000 21 GREEN, DARK 1583A 0061000 4 PR #24 PP FR PVC 1000 21 BLUE, LIGHT 1583A 0061640 4 PR #24 PP FR PVC 1640 34.
ETC ARCHITECTURAL Unison® External Processing Rack ER Series G E N E R A L I N F O R M AT I O N O R D E R I N G I N F O R M AT I O N Unison ER Series brings the power of Unison control to your distributed Unison, Sensor or other DMX-512 dimming system.
S P E C I F I C AT I O N S GENERAL MECHANICAL ELECTRICAL External Processing Rack (ER4) houses the architectural control processor and option modules Provides architectural lighting control for Unison, Sensor, and other DMX512 dimming racks Ambient room temperature: 0-40˚C / 32-104˚F Ambient humidity: 30-90% non-condensing All racks UL and cUL LISTED 18 gauge formed steel panels Fine-textured, scratch resistant, epoxy paint ER4 may be wall mounted, or rack mounted when installed with the Rack mount kit (
Unison® External Processing Rack ER Series UNISON CONTROL WIRING Wiring Specification Description Specification Maximum Length Unison Link Power (PLP) AUX Power ESD Ground DMX ETCNet2 Belden 8471 (2) #16AWG (1) #14AWG (1) Belden 9729 (1)CAT5-UTP 1640’ (500m) Barbizon Light 1640’ (500m) 328 Ft (100m) WPI Submittal Package Page 30 of 43
Unison® External Processing Rack ER Series ER 4 Wall Mount ER 4 Rack Mount TOP VIEW TOP VIEW 7.00" / 177.8mm 8.63" / 219.2mm 15.50" 19.00" 393.7mm 482.6mm FRONT VIEW FRONT VIEW 16.25” (412.8mm) 17.50" / 444.5mm DISKETTE 16.25" / 412.8mm RESET EXIT EXIT ENTER ENTER LIGHTING CONTROL SYSTEM LIGHTING CONTROL SYSTEM 15.50" 7.00" 19.00" 8.63" 393.7mm 177.8mm 482.6mm 219.2mm BOTTOM VIEW BOTTOM VIEW 7.00" / 177.8mm 8.63" / 219.2mm 15.50" 15.50" 393.7mm 393.
Unison® Button Station ETC ARCHITECTURAL Control Series set 1 set 2 O R D E R I N G I N F O R M AT I O N set 3 Button Stations Pre Pre Pre 4 set Pre Off G E N E R A L I N F O R M AT I O N Unison button stations are specially designed for reliable, recall of pre-programmed presets or macros. Ideal for entrance locations.
Unison® Button Station Control Series DIMENSIONS S P E C I F I C AT I O N S MECHANICAL Button stations shall consist of an electronic assembly and faceplate which shall utilize a cantilever styled switch array. Flush Backbox Dimensions Stations shall flush mount in industry standard 1-gang back boxes (provided by others). Surface mount back-boxes shall be available for one-gang stations. Station faceplates and button caps shall be constructed of injection molded, ABS plastic.
Source Four® 36° ETC, Inc.
Source Four® 36° 436 Series PHOTOMETRIC PHYSICAL Initial Color Average Lamp code Watts Volts Lumens Temp. Rated Life MF All photometric data in this document was prepared using standard production fixtures, and the Prometric™ CCD measurement system. Fixtures were adjusted for cosine distribution, and were tested with a calibrated HPL 750/115V 21,900 lumens lamp at its rated voltage. All data were normalized to nominal lamp lumens. 36° Distance (ft) 35 40 Field Diameter (ft) 15.8 18.9 22.1 25.
Source Four™ 50º ETC, Inc.
Source Four™ 50º 450 Series PHOTOMETRIC PHYSICAL Initial Color Average Lamp code Watts Volts Lumens Temp. Rated Life MF All photometric data in this document was prepared using standard production fixtures, and the Prometric™ CCD measurement system. Fixtures were adjusted for cosine distribution, and were tested with a calibrated HPL 750/115V 21,900 lumens lamp at its rated voltage. All data were normalized to nominal lamp lumens. 15 20 25 Field Diameter (ft) 9.5 14.3 19.0 23.
FRESNEL LIGHTING Catalog Numbers 65Q 165Q 165Q Fixture Type: A lightweight, short-throw, all-purpose lighting device, the 6″ fresnel produces a softedged beam varying in diameter from 4.2 feet to 21 feet at a throw distance of 15 feet. The 65Q and 165Q are designed for operation with long-life, high-intensity tungstenhalogen lamps. The luminaire is used in theatre for acting area lighting where beam shaping is not required, or in television studios for key and back lighting.
7 5 0 - WAT T 7 ″ F R E S N E L Specifications Catalog Numbers 65Q 165Q Housing: Sheet-steel construction. Materials: Corrosion-resistant materials and hardware. Yoke: Rigid flat steel with clearance hole for ¹⁄₂″ bolt. Reflector: Alzak aluminum, spherical design. Lens: Pyrex fresnel lens with stippling on flat surface. Socket: Altman medium prefocus, tool-free relamping. Rating: 120/240 volts AC/DC operation, 6.3/3.1 amps, 750 watts maximum.
SANDWICH HOLDERS • Aluminum construction acts as a heat sink to minimize pattern warpage Name A S4 “A” 3 11/16” 3 3/16” 2150 S4 “B” 3 11/16” 2 3/4” 2160 S4 Jr. “M” 2 11/16” 2 5/32” 2165 SL “B” 4 3/16” 2 3/4” 2144 360Q/Shakespeare 3 5/16” 2 3/4” 2120 Colortran Style (5/50 Series) 4” B Large heat resistant ring pulls Cat.
Barbizon Light WPI Submittal Package Page 42 of 43
Barbizon Light WPI Submittal Package Page 43 of 43