User manual

12 Unison Paradigm Touchscreen User Manual
• Connection Type: this is the type of connection that is made to the P-ACP. Options
include “Ethernet” which is NetConnect, or “Lon” which is LinkConnect.
Config tab
The “Config” tab displays the project information that was provided in ControlDesigner.
Project information can only be modified in ControlDesigner.
Note:
This is a very useful tool when troubleshooting your communication connection
between the Paradigm Touchscreen and your Paradigm control system.
When a Paradigm Touchscreen is connected by NetConnect, the IP address of
the P-ACP will display as the “Server Address”.
A Paradigm Portable Touchscreen will indicate the Connector ID of the Portable
Connector Station (UH1RS) it is connected to.