User's Manual

Parts List
1 interior plate
First things rst—make sure you have all of the necessary components in
your SimpliciKey package.
2 remote control
keyfobs
1 deadbolt lock
1 strike plate
1 reinforcement
plate
1 strike box
2 keys
2 short
wood
screws
2 long
wood
screws
2 long bolts
2 strike wood screws
2 short bolts
1 interior lock
1 exterior lock
2
11
Changing Your User Admin Code
Enter your Default Admin Code (see below) or the existing User
Admin Code and press the * key to begin Admin mode.
Next, enter ADMIN (23646) on the keypad and press the * key.
Next, enter a new 4–6 digit Admin Code and then press the * key.
Finally, repeat your entry of your new 4–6 digit Admin Code
and then press the * key.
We recommend that you write down
your new Admin Code here and keep
this manual in a safe place.
New Admin Code
You will then receive the nal conrmation tone and the keypad
will ash twice to let you know that the User Admin Code has
been changed.
Default Admin Code
If the keypad ashes and a multi-tone alert goes o
at any point in admin mode, you have taken too
long and will have to start over from the rst step.
Critical Point
New Admin Code
New Admin Code
New Admin Code
A - D - M - I - N -
WARNING: SimpliciKey submits that no
lock, by itself, can provide complete
security. As with other mechanical and
electronic locking devices, the security of
this lock has the potential to be compro-
mised. We remind all our customers to
exercise good safety procedures as part
of your home security plan. SimpliciKey
locks are manufactured to ANSI Grade 2
specifications. For added levels of
security, consult a qualified locksmith or
security expert.