User's Manual

ManualsBrandsElectronic Warfare Associates ManualsElectronicsRemote Control Electronic Door Lock FOB

Your administration code (Admin Code) can be found

on the back of this booklet. The Admin Code can be

changed by following instructions on page 11.

4. Remove Existing Strike Plate

First, remove the two existing strikeplate screws.

Remove the strike plate and any other hardware

behind the plate.

Install strike box, reinforcement plate, and strike

plate, then tighten screws.

5. Install New Strike Plate

Place strike plate into door frame

to check that the plate sits ush

with the frame.

Make sure the deadbolt freely

slides into the strike plate when

the door is closed by inserting a

Phillips head screwdriver into the

cross-hairs, then twist to extend.

For help aligning the strike plate,

please refer to the template.

Once aligned, secure the

strike plate to the door with two

long wood screws.

Deadbolt

Strike plate

Strike box

Strike plate

Strike wood screw

Long wood screw

Keypad Instructions

Command Press

Add Key Code

Delete a Key Code

Delete all Key Codes

2. Enter “ADD CODE”, press *

1. Enter Admin Code

2. Enter “DEL CODE”, press *

2. Enter “DL CODES”, press *

3. Repeat “DL CODES”, press *

3. Enter the new Key Code, press *

4. Repeat the new Key Code, press *

5. Test the new Key Code, press

3. Enter the Key Code to be deleted,

press *

4. Repeat the Key Code to be deleted,

press *

4. Test the deleted Key Codes,

press

Repeat

Enter

Enter Admin Code

New Key Code

Test

New Key Code

A - D - D - C - O - D - E -

Repeat

Key Code to Delete

Enter

Key Code to Delete

Test

Deleted Key Code

Enter Admin Code

D - E - L - C - O - D - E -

Test

Deleted Key Code

Enter Admin Code

D - L - C - O - D - E - S -

Reinforcement plate

5. Test the deleted Key Code,

press