User's Guide
Key Sequence Display
To activate the clearing station frequencies automatically process for all the
memory slots, hold down 4 key for 6 seconds.
To activate the storing station frequencies automatically process, hold down key 6 for 6
seconds.
When the automatic programming begins the screen will display the word “AUTO”.
The electronic module will store into the memory the stations that are received with the best
reception, sequentially from lowest frequency (87.5 MHz) to highest frequency (108.0 MHz).
The system will use all the memory slots available, reaching a maximum of 30.
The process can take a few moments. Once the scan has been completed or once the
maximum number of memory slots has been used, the process ends and a BEEP signal
sounds.
4.5 Storing and Clearing Station Frequencies Automatically
To adjust the automatic station search sensitivity (see 4.1. Station Search),
select a value between 1 (minimum) and 3 (maximum) and press key FM
SEN for 2 seconds
4.6 Adjusting Station Search Sensitivity
DEL ALL
AUTO
beep
6’’
6’’
SENS 1
FM SENS 1-2-3FM SENS 1-2-3
2’’
2’’
2’’
FM SENS 1-2-3
FM SENS 1-2-3
SENS 2
SENS 3
9
CC-1152ENG-03