Installation guide

1-6 Installing User Software on a Windows Computer

5. Enter the Fiery EX2101 IP address or DNS name.

6. If you want your printer driver to display the current settings when opened, select

Update Fiery Driver When Opened.

7. Click Update, and then click OK.

Completing the Windows 98/Me printer connection

To print from Windows 98/Me, you must:

•Set up network servers, if any.

•Set up the Fiery EX2101 to accept print jobs from your computer.

• Conﬁgure a port on each Windows 98/Me computer for the network type.

Completing the Windows 98/Me IPX/SPX or IPX (Novell) connection

If you are printing through a Novell server, the Novell network and ﬁle server should

be set up before you begin. The ﬁle server should be conﬁgured with a print server and

print connection for the Fiery EX2101. For details, see your NetWare documentation

and the Conﬁguration Guide.

To print from Windows 98/Me computers over IPX (Novell), you must ﬁrst set up

IPX/SPX protocols, and then conﬁgure the Fiery EX2101 by choosing the IPX frame

type and entering the settings for the port you use.

To do this See

Conﬁgure the IPX (Novell) connection “Completing the Windows 98/Me IPX/SPX or

IPX (Novell) connection” on page 1-6

Setting up the Windows (SMB) printing “Setting up SMB printing with

Windows 98/Me” on page 1-9

Setting up IPP printing “Setting up IPP printing with

Windows 98/Me” on page 1-11