Installation guide

1
1-11 Setting up PostScript or PCL printing with Windows 98/Me
6. Specify whether you print from MS-DOS based programs and click Next.
If you select Yes, you must capture a printer port before proceeding with the
installation. For details, see your Windows documentation.
7. In the dialog box displaying lists of manufacturers and printers, click Have Disk.
The Install from Disk dialog box prompts you for the disk.
8. If you are installing from the CD, type the name of the CD-ROM drive
(for example, D:\), and click Browse.
9. Browse to English\Prntdrvr\Ps_drvr\Win_9x_ME, and click open.
Make sure “Oemsetup.inf” is selected.
The path is copied to the Install From Disk dialog box.
10. Verify the path is correct and click OK.
Setting up IPP printing with Windows 98/Me
With Internet Printing Protocol (IPP), print jobs are sent to the Fiery EX2101 over
the Internet.
IPP printing is supported on Windows 2000/XP/Server 2003 but can be enabled on
Windows 98/Me computers by installing the “wpnpins.exe” client file (available on the
Windows Me CD or the Windows 2000 Server CD). For more information about
obtaining and installing this client, contact the Microsoft Corporation or Microsoft
Technical Support.
NOTE: The IPP setup procedures are performed after installing the appropriate printer
drivers. For more information, see “Installing the PostScript or PCL printer driver for
Windows 98/Me” on page 1-2.