Installation guide

1
1-13 Setting up PostScript or PCL printing with Windows NT 4.0
Setting up PostScript or PCL printing with
Windows NT 4.0
To set up the Fiery EX2101 as a PostScript or PCL printer, you must install the
PostScript or PCL printer driver for Windows NT 4.0 and the corresponding printer
description files. You must also configure the print connection between the computer
and the Fiery EX2101. If you are printing over a network, you must configure a
network connection.
Installing the PostScript or PCL printer driver for
Windows NT 4.0
The following procedures describe the installation of a local printer. Adding a printer
to a local system requires that you log in to your local Windows NT 4.0 computer
(not the network server domain) and that you are a member of the Administrators
group. The procedure for adding a network printer is similar to adding a port. For
instructions, see “Completing the Windows NT 4.0 TCP/IP and LPR connection” on
page 1-19.
TO INSTALL THE POSTSCRIPT OR PCL PRINTER DRIVER FOR WINDOWS NT 4.0
1. If you are installing from the User Software CD, insert it into the CD-ROM drive.
2. Click Start, choose Settings, and then choose Printers.
3. Double-click Add Printer.
4. To install a printer locally, select My Computer and click Next.
My Computer is available if you logged in to a computer on which you have
Administrator privileges. If it is not available, you can add a network printer.
The procedure is similar to adding a port. For details, see step 2 on page 1-20.