Installation guide

1-17 Setting up PostScript or PCL printing with Windows NT 4.0

NOTE: For Windows NT 4.0, you cannot specify Installable Options in the Advanced

tab of the Fiery EX2101 Document Properties dialog box when printing from an

application. To correctly specify Installable Options, install the printer driver from the

User Software CD. Print your job to the Hold Queue and then override the options

from the Command WorkStation Properties window or Fiery WebSpooler Override

Print Settings dialog box. For more information, see the Printing Guide and

Job Management Guide.

TO CONFIGURE INSTALLABLE OPTIONS ON THE FIERY EX2101 FROM THE PCL

PRINTER DRIVER

1. Click the Start button, choose Settings, and then choose Printers.

2. Right-click the Fiery EX2101 icon and choose Document Defaults.

3. Click the Installable Options tab and specify the options installed on the

Fiery EX2101.

4. Select an installed option from the Available Options list, and click Add to move the

option to the Installed Options list.

Tray 6 (HCF)

—Not Installed, Tray 6 (HCF)

Punch Options—Not Installed, 2/4 Hole Punch Unit, 3 Hole Punch Unit

NOTE: The Booklet Tray Option and Folder Tray Option is not available for the PCL

driver.

5. Click OK.

You are ready to connect to your network type. For details, see “Completing the

Windows NT 4.0 printer connection” on page 1-19.