Installation guide

1
1-20 Installing User Software on a Windows Computer
Before you continue, contact the system administrator for the IP address assigned to
the Fiery EX2101, as well as the subnet mask and the gateway address, if they are used.
NOTE: The TCP/IP protocol should already be installed on the Windows NT
computer.
TO SET UP TCP/IP AND LPR PRINTING FOR WINDOWS NT 4.0
1. Open the Properties dialog box for the Fiery EX2101, and click the Ports tab.
2. Click Add Port.
A list of the available port types is displayed.
3. Select LPR Port and click New Port.
If the LPR port is not listed, install the TCP/IP network protocol and
Microsoft TCP/IP printing software. For more information, see your
Windows documentation.
4. Enter the IP address of the Fiery EX2101.
If your network uses Domain Name Services (DNS), enter the DNS name assigned to
the Fiery EX2101 instead of the IP address.