Installation guide

1
1-25 Setting up PostScript or PCL printing with Windows NT 4.0
2. Browse for the printer you want to print to.
The printer name you are browsing for is the name entered in Network Setup>
Service Setup>Windows Setup > Server Name. For this information, see the
Configuration page.
The amount of network traffic determines the amount of time required for the
Browse function.
NOTE: You can also locate the printer with the Find feature on your Windows
computer. Click Start, choose Find, and then choose Computer. Enter the name of the
printer, and click Find Now.
If you cannot locate your Fiery EX2101, contact your network administrator.
3. Double-click the name of the Fiery EX2101 to display enabled print connections.
N
OTE: You may be promoted to enter a network password. If so, enter an arbitrary
alphabet letter for Connect As and click OK.
4. Double-click the name of the connection you want to print to.
The Printers dialog box appears, asking whether you want to set up the printer.
5. Select Yes to complete the installation for the selected connection.