Installation guide

1-33 Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003

5. Enter the Fiery EX2101 IP address or DNS name.

6. If you want your printer driver to display the current settings when opened, select

Update Fiery Driver When Opened.

7. Click Update.

8. Click OK.

Completing the Windows 2000/XP/Server 2003 printer

connection

To print from Windows 2000/XP/Server 2003, you must:

•Set up network servers, if any.

•Set up the Fiery EX2101 to accept print jobs from your computer.

• Conﬁgure a port on each Windows 2000/XP/Server 2003 computer for the

network type.

NOTE: The procedures for completing the printer connection for Windows 2000 and

Windows XP are similar. Windows 2000 illustrations are used, with relevant

Windows XP differences noted.

To do this See

Conﬁgure the TCP/IP (LPR port)

connection

“Completing the Windows 2000/XP/Server

2003 TCP/IP and Port 9100 or LPR

printing connection” on page 1-34

Conﬁgure the IPX (Novell) connection “Completing the Windows 2000/XP/Server

2003 IPX (Novell) connection” on page 1-37

Setting up Windows (SMB) printing “Setting up SMB printing on

Windows 2000/XP/Server 2003” on page 1-39

Setting up IPP printing “Setting up IPP printing with

Windows 2000/XP/Server 2003” on page 1-41