Installation guide

1-35 Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003

5. Enter the IP address of the Fiery EX2101.

6. Click Next.

The device is detected automatically.

7. Click Finish to close the Add Standard TCP/IP Printer Port Wizard dialog box, and then

click Close in the Printer Ports dialog box.

8. Click Conﬁgure Port in the Properties dialog box.

The Conﬁgure Standard TCP/IP Port Monitor dialog box appears.

9. If you have LPD printing enabled at the Control Panel, select LPR for Protocol and LPR

Byte Counting Enabled under LPR Settings.

OTE: You can also proceed without selecting LPR Byte Counting Enabled under

LPR settings.