Installation guide

1
1-38 Installing User Software on a Windows Computer
5. If the NetWare server does not have a suitable driver for the Fiery EX2101, you may be
prompted to set up the printer on your computer. Click Yes.
6. Click OK to install the Fiery EX2101 PostScript printer driver.
7. Follow the procedure starting with step 6 on page 1-14.
When installation is complete, a new printer window appears, with the name of the
print queue on the NetWare server.
8. Choose Properties from the File menu and click the Ports tab.
Verify that the connection to the NetWare queue is listed and selected as a port for
the Fiery EX2101.
9. Click the General tab and then click Print Test Page.
10. In the printer Job Notes window, enter user and job identification information and
click OK.
The Test Page remains listed in the queue window until it is printed.
The Fiery EX2101 polls the NetWare server for print jobs in the print connection
defined for the Fiery EX2101. When you print, your PostScript files are spooled to
that connection and transmitted over the queue “port” to the Fiery EX2101.