Installation guide

1
1-49 Using Fiery EX2101 software for the first time
3. Enter the appropriate information for the Fiery EX2101.
Nickname
—Enter a name for the Fiery EX2101. This name does not have to match
the actual Server Name of the Fiery EX2101.
NOTE: The nickname cannot contain any of the following seven characters:
[ ] _ " ' <space> <tab>
Protocol—Choose the type of network protocol you are using from the menu.
NOTE: Fiery utilities are not supported over IPX/SPX. Command WorkStation is
supported on Windows computers over TCP/IP.
Server Name—Enter the IP address (or DNS name) of the Fiery EX2101.
New Device—Enter the name of the device the Fiery EX2101 is connected to: EX2101.
NOTE: The New Device name is case-sensitive, type EX2101 exactly as shown.
4. When you have entered all the information, click Add.
For TCP/IP networks