Installation guide

1-50 Installing User Software on a Windows Computer

5. With the device name (EX2101) selected in the Devices list, click OK.

The Fiery EX2101 is displayed in the list of available servers. The ﬁrst line of the entry

displays the nickname you gave the server, followed by the protocol you chose.

The second line displays the device name.

6. With the device name selected in the list of Available Servers, click Select to begin

using the utility.

Modifying the conﬁguration

Edit the conﬁguration whenever there is any change to your Fiery EX2101 server or

network, such as a server name or IP address. If you change Fiery EX2101 Setup

information, do so before reconﬁguring the connection.

TO MODIFY THE CONFIGURATION FOR FIERY UTILITIES

1. To edit information for an Fiery EX2101 in the list of available servers, select the

Fiery EX2101 by its nickname and click Modify.

2. Make the necessary changes in the Modify Server Settings dialog box and click OK.

3. To add a new Fiery EX2101 to the list of available servers, click Add.

Conﬁgure the Add New Server dialog box as outlined in steps 3 through 5 in the

procedure on page 1-48.

4. To remove an Fiery EX2101, select the Fiery EX2101 by its nickname and click Remove.

NOTE: The nickname cannot be modiﬁed.

Device name of the

Fiery EX2101 (EX2101)