3208GLD USER MANUAL First Edition Electronics Line (E.L.) Ltd. www.elecline.com Notice: Electronics Line (E.L.) Ltd. reserves the right to change the information within this manual without notice.
Alarm Indication ............................................................................................................................ 7 Accidental Alarms ......................................................................................................................... 7 User Codes ...................................................................................................................................... 8 Emergency Keys & Duress ......................................................
Keypad Layout LED Display READY PROGRAM BYPASS TROUBLE LCD Display ARMED POWER ARMED POWER Status Indicators Numeric Keypad Arming Keys Buzzer Select Key 3106 LED Keypad The 3106 LED keypad uses light emitting diodes to indicate the system’s status. It is made up of indicators for 8 zones, programming, readiness of the system for use, bypassing of zones, trouble situations, power and arming. The keypad is used by entering command codes for the desired functions.
39 41 421 Unbypass All zones Set Time HHMM MMDDYY Walk Test 5 61 62 User Codes View Log Clear Log 84X Set Relay X 9 Access Control To issue a command from the keypad using a Command Code: 1. Press "SELECT". The program indicator will turn on (LED keypad only). 2. Enter the command code. 3. Enter your authorized user code should the keypad indicate a need for one. LCD Menu Selection The menu offers you the ability to select keypad functions by scrolling through the menu items.
System not ready to arm due to open perimeter zones: System armed, exit delay counting: System ready for perimeter arming (interior zones open). System ready for perimeter arming with perimeter bypassed zones.
in the area armed, such as during the day, when your home would be empty, or at night when your business would be closed. To arm the system using the LED keypad: 1. Check to make sure the ready indicator is on. 2. Press either the “STAY” or “AWAY” keys. If one key arming is disabled, enter your user code. 3. The ARMED indicator will light up, indicating that the system is armed. Exit the area within the exit delay countdown. Note: Failure to exit during the exit delay period will result in an alarm.
Bypassing a zone removes it from your system. Note: A bypassed zone is not protected by the security system. DISARMING (DEACTIVATING THE SYSTEM) Upon arriving back to the area protected by your Summit, you will need to disarm the system. Failure to disarm the system during the entry delay (if programmed) or after entering the protected area will result in an alarm. To disarm the system using the LED keypad: Enter your authorized user code. The system is now disarmed and the armed indicator will turn off.
Level 6 Level 7 Level 8 Level 9 Level 10 Level 11 Level 12 Level 13 Level 14 Level 15 >5 and Access control Operations of Level 5 + Zone bypassing, Clock change, Late to Close, Log clear, Remote programming and stop call Operations of Level 6 + User code programming Same as Level 7 Operations of Level 7 + Tests Operations of Level 9 + Programming Not available at this time Allows only Tests & Programming Allows only Log view & clear Allows only Tests Duress code level allows Arm, Disarm, Stop Call and Bel
To activate an emergency key press the “MENU/NEXT” key and then, while pressing the key, press the desired emergency key, for over one second. These keys may be programmed to sound a siren when pressed. Contact your installer to find out if this has been programmed for your Summit security system. A user code can be programmed for a duress situation. A duress code has an authorization level of 15. This user code will perform the selected operations (such as arming, disarming, bell canceling, etc.
3. Scroll through the log using the MENU/NEXT key. 4. The screen will display the end of the event log. ** END OF LOG ** To clear the event log: 1. Press “SELECT” 6, 2 or scroll through the menu. 2. Enter your authorized user code. The display will indicate the end of the event log and the log will then be erased. PARTITIONED/UNPARTITIONED OPERATION The Summit 3208GLD control panel can be operated in partitioned mode, enabling one Summit security system to operate as up to four separate sub-systems.
can be used to enter a pause in the dialing (ideal for dialing extension numbers) and the 4 key can be used for switching from pulse to tone dialing. When receiving a Follow Me call, confirm that the message has been received by pressing 0, 9 or # on your telephone. Late to Close This operation is used when the system is programmed to work with “Opening and Closing Windows”. Please contact your security installer to find out whether or not this function has been programmed for your system.
of the Exit/Entry delay. AC contact has been lost or the battery is low. Press any key and contact your installer. Ready light blinking slowly. The system is not ready to be armed. Secure the open zone. Programming light is blinking slowly. A user code is required to perform the desired function. Enter your authorized user code. Programming light is on. Waiting for input to be entered using the keypad. Enter information, press the AWAY key or wait. After 2 minutes the system will return to normal.
Armed: The state between arming and disarming. Upon detection, the system sends alarms and activates the siren. Authorization level: Assigned to each user code. Determines which alarm control panel activities can be performed by the different users. Away key: Completely arms the system (perimeter and interior), which can be programmed as a one touch key operation. Bypass zone x: Tells the system to ignore signals from the designated zone (x). Clear log: The user may choose to clear the events recorded.
Monitoring Service Account Number: For Service: Emergency Telephone Numbers Police: Fire: User Codes NAME/CODE/LEVEL 1. 2. 3. 4. 5. 6. 7. 8. Delay Entry Delay: Exit Delay: Zone Description Zone # DeviceType Descr. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Bell/Siren Outputs Fire Alarm: Steady Burglar Alarm: Steady Passcode: Address: Emergency: NAME/CODE/LEVEL 9. 10. 11. 12. 13. 14. 15. 16. Zone # Device Type Descr. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32.
