Installation guide

In addition the menu shows the detectors status using the abbreviations in Table 5.

Table 5: Abbreviations

3.4.2. Keyfobs

The CommPact Control System supports up to 19 keyfobs.

Step 1: Register a keyfob

1. Go to the main menu, select [9]>[1]>[2] (Programming > Devices > Keyfobs)

2. Using the arrow keys select a specific keyfob and press '√'. The system initiates

Registration mode.

3. Press a button on the keyfob, assuring the keyfob’s LED lights up when the

button is pressed.

4. Press the same button again.

5. When 'Save?' appears on the Control System’s LCD display, press '√'.

Step 2: Set the keyfob's parameters

1. Go to the main menu, select [9]>[1]>[2] (Programming > Devices > Keyfobs)

2. Using the arrow keys select a specific keyfob and press '√'.

3. Set the parameters for each keyfob according to Table 6.

Quick

Key

Option Name Description and Notes

9>1>2>2 Type Controlled or non-controlled. A controlled keyfob causes

the system to send set/unset event messages to the central

station. Non-controlled keyfobs never send set messages

and send a unset message only if the system is disarmed

after an alarm occurrence

9>1>2>3 Descriptor Descriptors help identify the device when you operate

and program the system. Use the

/ key to insert a

space

9>1>2>4 KF1 PGM Defines whether the keyfob can control the PGM with the

/ button.

9>1>2>5 Delete Delete a keyfob

Table 6: Keyfob parameters

Item Description… Item Description…

OK The transmitter is

functioning correctly

OS The transmitter is not

synchronized

TA Tamper condition NA The transmitter is inactive

BT Battery low