Operation Manual

ȱ
Quick Reference Guide
Function Press… Additional Information
ARM
FULL PART PERIMETER
One-Key Arming is disabled on the Control
System, enter your user code when arming.
The default master code is 1234.
INSTANT ARM
Hold down this key
until “Instant Arming
OK?” is displayed. Then
Press .
Instant arming cancels the entry delay after
Part or Perimeter arming. This feature can
be enabled by your installer.
DISARM [USER CODE] Entering your user code also silences the
siren in the event of an alarm.
PANIC
ALARM
Press these buttons together and hold them
down to generate an alarm.
FIRE
ALARM
MEDICAL ALARM +
MENU MODE
then [USER CODE]
Use the menu navigation buttons (/)
until the required menu item is displayed
then press . Alternatively, enter the
shortcut (e.g. 21 for Bypass Zones).
CHECK TROUBLE
CONDITIONS
Use this key scroll
the system trouble
list
Pressing  also silences any trouble tones
that may be sounded by the system.
SWITCH PGM ON
then 30 Enter 30 for PGM.
SWITCH PGM OFF
SERVICE CALL
+
“Dialing” is displayed. The number dialed
for the service call is programmed by your
installer.
GLOBAL
CHIME
then Use the menu navigation buttons (/) to
choose enable or disable, then press .
RECORD MESSAGE
After recording a message, “Message
Waiting” is displayed until the message is
played back.
The Message Center is an optional feature
that is included with certain versions of
CommPact Control System.
PLAY
MESSAGE
then
Telecontrol Commands
Function Press… Function Press…
2-WAY AUDIO
CANCEL SIREN
FULL ARM
EXTEND CALL
DISARM
DISCONNECT
then
ȱ
OR
OR