Operation Manual

1. Introduction and Overview
CommPact User Manual
ŗȱ
ȱ
1. Introduction and Overview
ȱȱȱ¡ȱȱ¢ȱȱȱȱȱ¢ȱȱ¢ȱ¢ȱ
ȱȱȬ¢Ȭȱȱȱȱȱ¢Ȃȱȱǯȱȱȱȱ
ȱ¡ȱ¢ȱȱȱȱ¢ȱǰȱȱȱ¢ȱȱȱȱȱȱ
ȱ ¢ȱ ȱ ȱ ȱ ȱ ȱ ¢ȱ ¢Ȃȱ ǯȱ ȱ ȱ ȱ ȱ ȱ
ȱȱȱȱǯȱ
ȱȱ¢ȱȱ¢ȱȱȱȱȱȱȱȱȱȱǯȱ
ȱȱȱȱȱȱȱȱȱȱ ¢ȱȱȱȱȱȱȱ
ȱȱȱ¢ȱ¢ǯȱȱ¢ȱȱ¢ȱȱȱȱ¢ȱȱȱ
ȱȱȱȱǰȱȱȱ¢ȱǯȱ
1.1. Documentation Conventions
ȱȱȱ¢ȱȱȱȱȱȱȱȱȱȱǰȱȱȱ
ȱȱDZȱ
Item… Description…
Select… Use the arrow buttons to scroll through the options and press
.
From the Event
Log Menu, select
Clear Log.
Enter the main menu by pressing
and entering your user
code. Using the arrow buttons, navigate until you reach
Event Log and press
. Using the arrow buttons, navigate
until you reach Clear Log and press
.
From the Service
menu, select Set
Time/Date, Set
Date.
The same as above only this time you are navigating through
three menu levels.
[7012] The shortcut to a specific menu item from the main menu. In
this case, this is the shortcut for Set Date. These appear in
the procedures as an additional aid to menu navigation.
[#5] A shortcut to a specific item in a sub-menu. For example,
[#5] is the shortcut to Bell enable disable in the sub-menu
that is opened once you have selected the detector you want
to program.
, buttons
buttons that appear on the keypad (
, )
śǯȱȱȱȱ
The text that actually appears on the LCD display (italics).
Note
Important caution, please pay attention.