Installation manual

-9-
Fire Zone Connections
When Zone 1 is defined as Fire, connect four-wire smoke detectors as shown below in
Figure 2.4.
+12V
789101112
Figure 2.4: Four-wire Smoke Detector Connections (Zone 1)
Telephone Line
(J4) Terminals 1, 2, 3, 4 & 5: Connect the telephone line using standard Telco wires
(minimum 26 AWG) as follows:
1 - Optional Earth, 2 - Home Tip, 3 - Home Ring, 4 - Telco Tip and 5 - Telco Ring
2.4: Mounting the Keypad
1234
AB
Figure 2.5: 3104 Plus LED Keypad (cover removed)
Configuration
Jumpers
Buzzer
Tamper
Switch
Terminal
Block