INSTRUCTION MANUAL MODEL 7522 +7060 Locations of Control Main Unit MODEL:7522 LGD BI MONTH HR BUTTON RE-SUNG BUTTON DATE/MIN BUTTON 3 YEAR /12124 BUTTON LOCKSMITH SET CALENDAR SWITCH 8 “cir SWITCH RESET BUTTON | " Wl BATTERY DOOR i Remote Unit |» Je) Boor Reset BY Battery Door H Wall Mount Holder
Feature * IN temperature and REMOTE temperature * Centigrade or Fahrenheit readout + Hour and minute display hour format | » Calendar from July 1, 1997 to December 31, 2039 + Maximum and Minimum Temperature record + Battery life : approximate 1 year ( with alkaline battery ) * Operating temperature from 0°C to 40°C (32°F to 104°F) + Temperature measuring range from -50°C to 70°C (-58°F to 138°F) + Temperature resolution 0.
Getting Started Once batteries are placed in the main unit, it will start receive signal for 5 minutes, also once batteries are placed in the remote unit, it will start to transmit information at 3 minutes intervals. Upon successful reception, the remote unit temperature will be displayed on the Remote temperature field. The main unit will automatically update the remote reading at 3 minutes intervals.
remote temperature display on the main unit is dominated by the selection on the main unit. Whatever the display unit of the remote unit is, it will be automatically converted to the chosen one of the main unit. Receiver stage indicator The stage indicator indicate the following stage of the received signal NO SIGNAL DETECTION ~ > ~DH) | SIGNAL DETECTING M4} | successful RECEPTION Lose Sync. If without obvious reasons the display goes blank, press RE-SYNC to force the receiver to start receive signal.
MODEL:7522 Perspective View From Front Lef: Side Perspective View From Rear And Right Side The remote unit comes with a wall mount holder which can hold the unit on wall, or just place it on a flat surface.
Reset the RF Thermos Clock Press the RESET button when the RF Thermos Clock does not operate normally. Note: Once resetting the RF Thermos Clock, the main unit will start to receive for 5 minutes ( Refer to Getting Started ). Take care of your RF Thermos Clock * Avoid exposing your RF Thermos Clock to extreme temperatures, water or severe shock. «Do not put your RF Thermos Clock in conditions of excessive force, shock, dust, extreme temperature or humidity.
Power © apes AA 1.5V battery Weight : 136g Dimension © 13x7.5x5.0mm Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user is authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.