Manual

MC Controller
MagnaValve® Media Flow Controller
Features
• Provides a power signal to the VLP-1000, LP-2000, and 100 MagnaValve®
• 10-turn potentiometer setpoint
• Accepts remote command setpoint or 0 -10 Vdc from PLC
• Easy panel mounting
• 120 Vac 50/60 Hz
Description
The MC Controller provides the power signal for the manual MagnaValves series (VLP-1000, LP-2000,
and 100 MagnaValve®). It provides a 0-100% range of output to the MagnaValve using pulse width
molulation (PWM). The controller may operate alone or in conjuction with a remote 0 - 10 Vdc setpoint
command. Both wheel- and air-type MagnaValves can be used with this controller.
A clear and comprehensive installation manual simplies installation for the MC Controller and the
product is supported by the Electronics Inc. application engineering sta.
Electronics Inc.
56790 Magnetic Drive
Mishawaka, Indiana 46545 USA
[phone]
www.electronics-inc.com
Specication is subject to change without notice
Rev 1/13
MagnaValve is a registered trademark of Electronics Inc.
Available for download at www.electronics-inc.com
• VLP-1000 MagnaValve Data Sheet • 100 MagnaValve Data Sheet
• LP-2000 MagnaValve Data Sheet • MC Instruction Manual
MC
Controller
Regulated Media Flow
Control Signal
Motor
Current
Ammeter
Media Accelerated
Media
Hopper
MagnaValve
Wheel
Desired
Motor Current
The MC Controller and MagnaValve make an open-loop system
with a wheel-type machine