User guide

Pot-24 Controller
MagnaValve Control
Features
• 0 - 10 Vdc signal output to MagnaValve
• Output limit control prevents motor overload
• Mounts on panel door for easy access
• Front and back LED indicators
• Provides manual operation (an open loop system)
for the LP-24, VLP-24 and WM 3000-24 MagnaValve®
• Operates from 24 Vdc
Description
The Pot-24 Controller provides manual operation (an open loop system) to the MagnaValve® with a 0 - 100% control
signal range. The controller can also be used as a safeguard by setting the output limit for 20% - 100%, thus limiting
the signal to the MagnaValve, restricting the shot’s maximum ow rate and preventing excessive current to the wheel.
Electronics Inc.
56790 Magnetic Drive
Mishawaka, Indiana 46545 USA
[phone]
www.electronics-inc.com
Specication is subject to change without notice
Rev 2/14
MagnaValve is a registered trademark of Electronics Inc.
The Open Loop System
with the POT-24 Controller and a MagnaValve
1
1
2
2
3
3
4
4
A A
B B
SHEET 1 OF 2
DRAWN
CHECKED
QA
MFG
APPROVED
BRYAN C
2/21/2012
CPN
999333
TITLE
POT - 24
SIZE
B
SCALE
ELECTRONICS INC.
56790 MAGNETIC DRIVE - MISHAWAKA, IN 46545 USA
REV
0
MEDIA FLOW CONTROLLER
T:\Projects\Pot-24\CD054540.idw
0
REVISION HISTORY
REV DESCRIPTION DATE APPROVED
Pot-24
Controller
Regulated Media Flow
Control Signal
Motor
Current
Ammeter
Media Accelerated
Media
Hopper
MagnaValve
Wheel
Desired
Motor Current