Operating Instructions

January 8, 2021
GTW-BL100 Wireless Gateway
9
ANTENNA
The Gateway has two antenna ports to support dierent wireless protocols. The GTW-BL100 only
supports Bluetooth, so only the 2.4 GHz antenna is required to be connected. The 2.4 GHz antenna
connecon is located on the right front of the Gateway.
The GTW-BL100 is designed to operate with the following antenna:
Manufacturer:
PulseLarsen Antennas
Part Number:
W1010
Frequency:
2.4 – 2.5 GHz
Gain:
2.0 dBi
Nominal Impedance:
50 Ω
VSWR:
≤ 2.0
Polarizaon:
Vercal
Electrical Length:
¼ Dipole
Radiaon:
Omni
When adjusng the posion of the antenna, it is advisable to always rotate the antenna in a clockwise
direcon. Rotang the antenna counterclockwise may inadvertently unscrew the antenna connector in
the enclosure.
2.4 GHz
Not Used