Operating Instructions

January 8, 2021
GTW-BL100 Wireless Gateway
14
3. Enter 'z' (Lowercase Z) in the terminal
window. The Conguraon Menu will
be displayed.
4. Select opon '1' for Programming
Mode. Opons will be displayed for
programming the Gateway (Node) ID
and the Broker IP address.
PROGRAMMING GATEWAY ID
Select opon '1' from the Programming
Mode menu to program the Gateway ID.
The Gateway ID must follow the following
format:
GTWXXXXXX-YYYY
Where X and Y are numbers. Press [ENTER]
to save the new Gateway ID, or [ESC] to exit
without saving.
The Gateway will save the new Node ID in
non-volale memory. In order to apply any
changes, the Gateway must be reset.