Operating Instructions

January 8, 2021
GTW-BL100 Wireless Gateway
15
PROGRAMMING BROKER IP ADDRESS
Select opon '2' from the Programming
Mode menu to program the Broker IP
Address. The IP address must be entered in
the following format:
XXX.XXX.XXX.XXX
Only the IPv4 address format is accepted.
Press [ENTER] to save the new Broker IP
address, or [ESC] to exit without saving.
The Gateway will save the new Broker IP
address in non-volale memory. In order to
apply any changes, the Gateway must be
reset.
READING GATEWAY ID AND BROKER IP ADDRESS
To view the current Gateway ID and Broker
IP address, select opon '2' (Reading Mode)
from the Conguraon Menu. The Gateway
ID and Broker IP address will be displayed.
The terminal window will automacally
return to the Conguraon Menu aer 10
seconds.