Maintenance Guide Part 2

NeTIS MAINTENANCE GUIDE – Version 1.1 62/139
7. WINSCP – SOFTWARE UPDATE
*See also the "Authentication" chapter which only covers NeTIS-Bs.
Use the "WINSCP3" software.
This software is used for the secure transfer of files (version 2 of the SSH protocol) between a
Windows station and a Linux server. It is used to update the versions of BS, SWITCH end
LINUX SUPIP.
Connection via Ethernet link and CPUBDT board.
The factory setting for the Network board is 192.168.1.3, however, if this has been changed,
use the new one:
To do this note down the network board configuration by installing a screen and keyboard on
the CPUBDT board, the ETELM application running (ACT indicator flashing on the
CPUBDT board) then press the [ALT] [F2] keys (Warning, a reset of the CPUBDT board
may be needed to detect the screen.)
Launch WINSCP3:
If WINSCP3 is being used for the first time a connection must be created: