Maintenance Guide Part 3

NeTIS MAINTENANCE GUIDE – Version 1.1 93/139
"End of file
8.3.4.5 Checking the IP configuration on the BS side
Once the Niveau2 software is running it is possible to activate different network management
terminal using the ALT+Fx keys, without disturbing the current application
Connect a screen and keyboard and press the "ALT F2" and "L" keys, the display below
appears:
"start of display
* 0 client connected with server 4 on port 55555 , socket 16
*** NbClient=0 found=0
* Connected at server no 0 : 192.168.1.124 port=50400 with socket 14 (69s)
* Connected at server no 1 : 192.168.1.125 port=50401 with socket 15 (69s)
--> UDP Address UDP 0: 192.168.1.121 port : 50300 TX_ONLY socket=19
--> UDP Address UDP 3: 192.168.1.121 port : 50401 FULL_DUPLEX socket=12
Port used for
maintenance
(Spy etc.)
Port used for
maintenance
(Spy etc.)
Bs connected
to the switch
SWITCH CPU
IP address
BS Signalling
port
Socket N°
Bs connected
to the switch
SWITCH
SUPIP IP
BS Phone Port
Socket N°
UDP Protocol
BS IP address SWITCH CPU
signalling port
Port open in
the TX
UDP Protocol
BS IP address
BS Phone Port
Port open in
TX and RX