Maintenance Guide Part 3

NeTIS MAINTENANCE GUIDE – Version 1.1 75/139
8.2.2.2 NeTIS-B configuration
Each NeTIS-B on the network must be configured to work on an it from the G703 link (see
§9.1.1.1)
8.2.2.3 NeTIS-N configuration
The SWITCH is configured via the network management terminal
A double click on the SWITCH in monitoring mode displays the following window
All the connected resources in the SWITCH are visible
To find out the role of each of the COM3 or 4 boards, view the BS states
To do this access the SYNOPSIS area of the network management terminal and double
click on the BS