User Manual

▪ Two XLR outputs for easy system expansion to additional loudspeakers or subwoofers.
Large slot ports for low distortion and excellent bass extension. Two metal grille
reinforcement bar. M20 threaded pole mount plate.
Quick Setup
The EKX powered loudspeakers from Electro-Voice with carefully matched electronics and
transducers. These products make it easy to set up a high quality system quickly with a
minimum amount of cables and external electronics.
Full-Range loudspeaker
Models: EKX-12P and EKX-15P
To set up a full-range loudspeaker, do the following:
Step Illustration
1. Connect the AC power cord from a
grounded line receptacle to the MAINS
IN.
2. Connect the XLR, TRS, or RCA cable
from an audio source to INPUT 1 or
INPUT 2.
3. Adjust the input gain to (infinity).
4. Switch POWER to ON.
5. From the DSP home screen, increase the
input gain to the desired sound output.
6. Adjust the MASTER VOL knob to the
desired volume.
2.2
EKX Powered Loudspeakers
2017.01 | 06 | F.01U.318.952 User Manual Electro-Voice