Instructions / Assembly

Questions?
E-mail our customer service department at
customerservice@alltherages.com
IMPORTANT SAFETY INSTRUCTIONS:
ASSEMBLY INSTRUCTIONS:
CLEANING & MAINTENANCE:
This fixture must be installed by a qualified
electrician!
Disconnect the power at the main electrical
panel before installation.
This fixture is for indoor use only. The fixture
should not be used near water. Never cover
the lamp with any object, including cloth or
paper as this is a fire hazard. Do not handle
the bulb immediately after the light is turned
off as it will be hot. This is not a toy. It is
recommended that you wear gloves during
assembly.
1. TURN THE MAIN POWER SUPPLY OFF
2. ATTACH THE MOUNTING PLATE (E) TO THE
ELECTRICAL BOX "G" WITH SCREWS "C"
3. MAKE THE WIRE CONNECTIONS (D).
CONNECT BLACK TO BLACK WIRE AND WHITE
TO WHITE WIRE. ATTACH GROUNDING WIRE
(HAS A GREEN LINE ON IT) TO THE MOUNTING
PLATE "E" GROUNDING SCREW "F"
4. ALIGN THE HOLES IN CANOPY "B" TO THE
MOUNTING PLATE "E" , AND SECURE THE
CANOPY WITH THE 2 NUTS "A"
5. ATTACHED POLE "H" TO CANOPY "B
TURNING COUNTER CLOCKWISE UNTIL
SECURE DO THIS WITH THE ADDITIONAL
POLES "I-K" DEPENDING ON DESIRED LENGTH.
6. ATTACHED SOCKET "L" TO THE COMPLETED
POLE
7. PLACE SHADE "M" ONTO THE SOCKET "L"
AND SECURE WITH SOCKET NUT "N"
8. INSTALL BULB INTO SOCKET "L". ONLY USE
BULBS OF
SPECIFIED TYPE AND MAXIMUM RATED
WATTAGE OR LESS.
Instruction Manual
PENDANT
BULB REPLACEMENT
Disconnect the power before replacing bulb.
TROUBLESHOOTING
I. If lamp does not light, check the bulb for a broken
filament.
Replace bulb if necessary.
2. If the external flexible cable or cord of this fixture is
damaged, it must be replaced by a qualified electrician
in order to avoid a hazard.
MAINTENANCE
I . To clean, use a soft, dry cloth only.
2. Do not use any chemical or abrasive cleaners.
REQUIRES:
1-60W MAX MEDIUM BASE
TYPE A BULB (NOT INCLUDED)

Summary of content (2 pages)