COMPONENTS PART FIGURE DESCRIPTION | QTY | PART FIGURE DESCRIPTION | QTY A D LEFT SIDE PANEL | 1PC | F \ PLASTIC BAR | 1PC B s UPPER BACK RAIL| 1PC | @ g BACK RENAL | PCS ¢ < BOTTOM PANEL | 1PG | H &7 |ADJUSTABLE SHELF| PCs D RIGHT SIDE PANEL| 1PC Q RIGHT DOOR | 1PC E < TOP PANEL | 1PC | J H LEFT DOOR 1Pe
HARDWARE & TOOLS PART FIGURE DESCRIPTION | QTY | PART FIGURE DESCRIPTION | @QTY 1 6@ CAM BOLT | PCS | 6 = BOLT PCS 2 2 CAM LOCK | PCS | 7 N SCREEN PCS Q #15%12 3 WOODEN DOWEL | PCS | 8 SCREW PCS %flfim MG 4 gy SCREW 14pcs| 9 % ANCHOR PCS $3%12 D=7 5 & SHELF PIN | PCS | 10 @ KNOB PCS MOUNTAINEERED: SUGGESTION: ’i O PHILIPS SCREWDRIVER REQUIRED ‘q NOT INCLUDED TWO PEOPLE FOR ASSEMBLING WARNINGS: 1D NOT LET ANY SHARP OBJECT TOUCH DR BUB THE SURFACE OF THE PRODUCT. 2:WHEN SEMARANG.
STEP 1: 1. Screw cam bolts (1) and insert dowels (3) to panel A& D. 2. Attach rail B & panel C to panels A & D and secure with cam locks (2).
4 pos 2 4 PCS #15%12 3 \ 6 PCS STEP 2: 1. Screw cam bolts {1) to panel E. 2. Insert dowels (3) to the tops of panels A & D and rail B. 3. Attach panel E to panels A & D and rail B and secure with cam locks (2).
3 a 14 pCS ®aw1z =7 g STEP 3: 1. Attach panels G to the back of the cabinet & secure the four comers with screws (4). 2. Insert plastic bar F between the two panel Gs and finish securing the panels with screw (4).
STEP 4: 1. insert shelf pins (5) in panels A & D and rest the adjustable shelf H on the shelf pins. 2. Attach knobs (10) to door | & J with bolts (6). 3. Attach door panels A & D with screws (7).