Instructions / Assembly

Garden Barrel Planter Assembly Instruction
(Images shown in this assembly instruction are using Model GB2417;
your actual product will looks different by model, but assembly steps are the same)
Parts & Components List Descriptions Quantities
2" Phillips Screws
(Screws count varies for
different models)
GB1607: 24 pcs
GB2009: 30 pcs
GB2413: 36 Pcs
GB2417: 48 Pcs
A Panels 3 Pcs
B Panels 3 Pcs
C Bottom Boards & Plastic
Cap
2 Pcs
Step 1
1. Tool Needed: Phillips Screw Driver (Not Included)
2. Power Screw Driver Not Recommended,
3. Please check parts and component list before you start,
4. Please read entire instruction before you start,
5. This Barrels is made of Chinese Fir with disstress finish to maintain natural look,
color may vary, you may see some crack and split on the wood surface, this does not
hurt the integrity and strength of the product.
6. Please contact us at 1-866-931-4207 if you have any questions or e-mail us at
[e-mail]
1. In this step you will need to use Phillips Screw driver (not provided) 1
Pc Panel A, 1 Pc panel B and 8 Pcs 2” screws.
2. Align Panel A & Panel B as images shown,
3. Place 2” Screws into pilot hole and tighten,
4. Do not screw too tight, please leave some room for adjustment,
Bottom Edge,
with Broader
Top Edge - Flat