Instructions / Assembly

Garden Barrel Planter Assembly Instruction
(Images shown in this assembly instruction are using Model GB2417;
your actual product will looks different by model, but assembly steps are the same)
Place Bottom Boards inside the
barrel
Step 2
Take B panel , align and join to
A panel, Do not Screw
Take A panel , align and join
to B panel, Do not Screw
Repeat same step as above until
all panels are in place
When all 6 sides are in place, adjust if needed
to make sure they all join tightly.
Then apply 2” screws in pilot holes
on each joint, screw tight and secure.
Step 3
Bottom Edge,
with Broader &
Footing