Installation Guide

Step 1
Step 1
Step 2
Step 2
Pencil mark the mounting screw holes then pre-drill holes for
mounting screws.
Attach mounting brackets (A) using provided mounting screws (C).
Note: If mounting in drywall or plaster wall, use the provided plastic
screw anchors (D).
Pencil mark the mounting screw holes then pre-drill holes for
mounting screws.
Place the Spacer (B) on top of Mounting Bracket (A) as shown
above. With mounting brackets level and flush with the window
frame or ceiling, using provided Mounting Screws (C), screw
through the top of the Mounting Brackets and up through the
spacers (B).
Note: If mounting in drywall or plaster wall, use the provided plastic
screw anchors (D).
Insert the top front of the headrail onto the front lip of the mounting
brackets (A).
Rotate upwards until the back of the headrail snaps into bracket.
Insert the top front of the headrail onto the front lip of the mounting
brackets (A).
Rotate upwards until the back of the headrail snaps into bracket.
Outside Mount Installation Instructions
Inside or Ceiling Mount Installation Instructions
Outside Mount
Inside Mount
Outside Mount
Inside Mount
3
Cleaning
Periodic Vacuuming with proper attachments suggested. Spot clean with mild detergent free soap, testing first in an inconspicuous area.
AA
A
A
C
A
C
B
AA
A