COMPONENTS PART FIGURE DESCRIPTION | QTY | PART FIGURE DESCRIPTION | QTY A < TOP PANEL 1r¢ U BACK PANEL | PCS B H LEFT DOOR 1PC ¢ H gT:ERpngT e | K RIGHT DOOR | 1PC D o~ |ADJUSTABLE SHELF| 1PC | L / UPPER BACK RAIL | 1PC E < FIXED SHELF | 1PC | M / UPPER FRONT RAIL| 1PC F M MIDDLE PANEL | 1PC | N 1P¢ e < BOTTOM PANEL | 1PC | © H 1P¢ H \ PLASTIC BAR | 1PC | P / BOTTOM RAIL | 1PC
HARDWARE & TOOLS PART FIGURE DESCRIPTION | QTY | PART FIGURE DESCRIPTION aTY CAM LOCK PCS | 9 & SHORT BOLT | PCS 915412 2 CAM BOLT PCS | 10 SCREW PCS W@ @3*2 D=7 3 \v WOODEN DOWEL | 20PCS| 12 & SHELF PIN PCS 30 4 SCREW PCs | 13 SCREW PCS WW M‘MS 5 s SCREW PCS | 14 ANCHOR PCS $3%12 % 6 % WOOD HANDLE | PCS TEMPLATE PAPER 8 M LONG BOLT | SPROGS TOOL NEEDED: SUGGESTION: PHILIPS SCREWDRIVER REQUIRED ;i -q =NOT INCLUDED TWO PEOPLE FOR ASSEMBLING WARNINGS: 1000 NOTELET ANY.
STEP 1: 1. Screw cam bolts (2) onto panels B & C and insert dowels (3). 2. Attach panel F to panels E & G with dowels (3). 3. Attach panels parts E & G and secure with cam locks (1).
1 Q'® 4 PCS Spitz P2 4 PCS 3 2 PCS STEP 2: 1. Screw cam bolts (2) onto panel A. 2. Insert dowels (3) on the tops of panels Attach panel A to panels B & C and secure with cam locks {1).
10 16 PCS ¢3¢2 =7 STEP 3: 1. Attach panels | to the partially assembled space saver and secure the four comers with screws (10). 2. Insert plastic bar H between panels | and finish securing the panels with screws (10).
STEP 6: 1. Insert dowels (3) on the tops of legs N& O and rails L& M 2, Attach rail P to legs N& O and secure with bolts (9).
