Specification

R3-G19ICA
3" LINE VOLTAGE GU-10 IC NEW CONSTRUCTION HOUSING
120V - IC AIR TIGHT GU-10 HOUSING
Project
Location
PRODUCT DESCRIPTION
COMPATIBLE TRIMS
Model Description Finish
R3-409 3" SHOWER TRIM W/ FROST GLASS MR16
matte white-brushed nickel-bronze, chrome
R3-421 3" ALZAK TRIM MR16
matte white ,matte w/clear, chrome w/clear
R3-488 3" GIMBLE TRIM MR16
matte white, brushed nickel, bronze
R3-493 3" TRIM W/ BL BAFFLE MR16
matte white, brushed nickel w/black
R3-509 3" SHOWER TRIM W/ FROST GLASS MR16
matte white, brushed nickel
R3-521 3" SQ ALZAK TRIM MR16
matte white ,matte white w/clear, brushed nickel w/clear
R3-555 3" SQ ON SQ TRIM MR16
matte white, brushed nickel
R3-559 3" SQ SHOWER TRIM W/ FROST GLASS MR16
matte white, brushed nickel
R3-588 3" SQ GIMBLE TRIM MR16
matte white, brushed nickel
R3-590 3" SQ BAFFLE TRIM MR16
matte white, brushed nickel
R3-593 3" SQ BAFFLE TRIM MR 16
matte white
R3-DR88 3" DIECAST GIMBLE TRIM MR16
matte white, brushed nickel
R3-DR93 3" DIECAST BAFFLE TRIM MR16
matte white
R3-DS88 3" SQ DIECAST GIMBLE TRIM MR16
matte white, brushed nickel
R3-DS90 3" DIECAST SQ BAFFLE TRIM MR 16
matte white, brushed nickel
R3-DS93 3" SQ DIECAST BAFFLE TRIM MR16
matte white
R3-DR488 3" DIECAST GIMBLE TRIM MR16
matte white, brushed nickel
LABELS: ETL/CETL listed （ETL listed number: 4005878) ETL listed
for through-branch wiring (8) No. 12 AWG 90°C and damp locations.
R3-G19ICAT housing is designed for IC rated ceiling. Accommodates
up to 35W GU10 Halogen & LED lamps.
SPECIFICATIONS
HOUSING: Low 7 3/8" profile for shallow ceilings. Pre-wired .037"
steel housing adjusts up to 1 3/4" ceiling thickness. Trim is secured with
torsion wing springs/standard coil springs. Designed to be installed in
new applications. IC rated housing may have direct contact with
insulation.
AIR FLOW RESTRICTION: Airtight models are designed to restrict
air flow from room into plenums in compliance to the WSEC-Washington
State Energy Code (less than 2.0 CFM-Cubic Feet per Minutes)
MOUNTING FRAME: Supplied with (2) 24" adjustable bar hangers .
Bar hangers equipped with (nail-less installation) 3/4" serrated barbed
studs for secure mounting in wood joists.
JUNCTION BOX: Pre-wired, galvanized steel J-box with (4) knock-
outs. Strain clamps and ground wire. Equipped with safety standard
thermal protector rated for 90°C.
200mm[8"]
250mm[10"]
325mm[13"]
200mm[8"]
76mm[3"]
84mm[3 1/2"]