Specification

R4-G19SAT
4" LINE VOLT NON-IC NEW CONSTRUCTION SHALLOW HOUSING
120V NON-IC Air Tight GU10
Project
Location
HOUSING: Die-formed Iron for maximum heat dissipation and
rust protection. Designed for New Construction installation and
suitable for using in non-insulation covered ceilings. Housing can
be installed in 1/2" to 1-3/8" thick ceilings. Non-IC rated housing
must be kept 3" from insulation.
LISTING: ETL listed for damp location W/Feed through.
PRODUCT DESCRIPTION
R4-G19SAT: housing is designed for NON-IC rated ceiling.
Accommodates up to 50W GU-10 lamp, 18W LED GU10.
JUNCTION BOX:
ETL listed for through branch wiring 4 in-4 out J-box.
Designed for straight through conduit runs 1/2" and 3/4" romex
wiring knockouts.
Pre-wired junction box provided with removable access plate.
Knockouts equipped with pry out slots.
All leads are #18AWG wire, ground wire is connected to the
bottom, quick connectors are supplied on all leads.
LAMP & SOCKET:
GU10 50W Max
LED 18W max.(See trim for max. wattage)
GU10 Base
CRI>80%
PF>0.9
Color Temperature: 2700K-6500K
4" LINE VOLT NON-IC NEW CONSTRUCTION SHALLOW
HOUSING