Specification

R4-G19SRAT
4" LINE VOLT NON-IC REMODEL GU10 SHALLOW HOUSING
120V NON-IC GU10 Base
Project
Location
4" LINE VOLT NON-IC REMODEL GU10 SHALLOW HOUSING
LAMP & SOCKET:
GU10 50W Max
LED 18W max.(See trim for max. wattage)
GU10 Base
CRI>80%
PF>0.9
Color Temperature: 2700K-6500K"
HOUSING: Die-formed Iron for maximum heat dissipation and rust
protection. Designed for New Construction installation and suitable
for using in non-insulation covered ceilings. Housing can be installed
in 1/2" to 1-3/8" thick ceilings. Non-IC rated housing must be kept 3"
from insulation.
JUNCTION BOX:
ETL listed for through branch wiring 4 in-4 out J-box.
Designed for straight through conduit runs 1/2" and 3/4" romex wiring
knockouts.
Pre-wired junction box provided with removable access plate.
Knockouts equipped with pry out slots.
All leads are #18AWG wire, ground wire is connected to the bottom,
quick connectors are supplied on all leads.
LISTING: ETL listed for damp location W/Feed through.
PRODUCT DESCRIPTION
R4-G19SRAT: housing is designed for NON-IC ceiling.
Accommodates up to GU10 bulb, LED GU10.