Specification

RE4ICAT-LED
4" LINE VOLTAGE NEW CONSTRUCTION IC HOUSING
120V- IC Air Tight LED Housing
Project
Location
PRODUCT DESCRIPTION
COMPATIBLE TRIMS
Model Description Finish
4" LED RETROFIT TRIM 3000K
matte white
LABELS: ETL/CETL listed （ETL listed number: 4005878) ETL listed for
through-branch wiring (8) No. 12 AWG 90
0
C and damp locations.
RE4LED4RT30
RE4ICAT-LED housing is designed for IC rated ceiling. Accommodates up
to LED Retrofit Trim
SPECIFICATIONS
HOUSING: Low 5 1/2" profile for shallow ceilings. Pre-wired .037" steel
housing adjusts up to 1 3/4" ceiling thickness. Trim is secured with torsion
wing springs/standard coil springs. Designed to be installed in existing sheet
rock ceilings via ceiling cut out (above ceiling access is not required). IC rated
housing may have direct contact with insulation.
AIR FLOW RESTRICTION: Airtight models are designed to restrict air flow
from room into plenums in compliance to the WSEC-Washington State Energy
Code (less than 2.0 CFM-Cubic Feet per Minutes)
MOUNTING FRAME: Supplied with (2) 24" adjustable bar hangers . Bar
hangers equipped with (nail-less installation) 3/4" serrated barbed studs for
secure mounting in wood joists.
JUNCTION BOX: Pre-wired, galvanized steel J-box with (4) knock-outs.
Strain clamps and ground wire. Equipped with safety standard thermal
protector rated for 90
0
C.