Specification

RE7ICA-LED
6" LINE VOLTAGE NEW CONSTRUCTION IC
AIRTIGHT HOUSING 120V-IC Air Tight LED Housing
Project
Location
PRODUCT DESCRIPTION
COMPATIBLE TRIMS
Model Description Finish
RELED6RT30 6" LED RETROFIT TRIM 3000K 13W
matte white
LABELS: ETL/CETL listed (ETL listed number: 4005878) ETL listed for
through-branch wiring (8) No. 12 AWG 90°C and damp locations.
RE7ICA housing is designed for IC rated airtight ceiling. Accommodates
up to LED Retrofit Trim
SPECIFICATIONS
HOUSING: Pre-wired .042" aluminum housing adjusts up to 1 3/4" ceiling
thickness. Trim is secured with torsion wing springs/standard coil springs. IC
rated housing may have direct contact with insulation.
AIR FLOW RESTRICTION: Airtight models are designed to restrict air
flow from room into plenums in compliance to the WSEC-Washington State
Energy Code (less than 2.0 CFM-Cubic Feet per Minutes)
MOUNTING FRAME: Supplied with (2) 24" adjustable bar hangers with
90°C repositioning ability. Bar hangers equipped with (nail-less installation)
3/4" serrated barbed studs for secure mounting in wood joists. Brackets maybe
flattened out to accommodate 27" flat bar hangers. Earthquake structural cable
compatible for drop panel ceilings or any other mounting that requires direct
support from structural ceilings.
JUNCTION BOX: Pre-wired, galvanized steel J-box (25 cubic-inch) with (4)
1/2", (3) 3/4", and (4) Romex knock-outs. Strain clamps and ground wire. Die-
cast aluminum fitting. Equipped with safety standard thermal protector rated for
90°C.
160mm [6 1/2"]
180mm
[7"]
180mm
[7"]
305mm-610mm
[12"-24"]
240mm [9 1/2"]